We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Flame Sensor.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Flame Sensor - List of Manufacturers, Suppliers, Companies and Products

Flame Sensor Product List

1～13 item / All 13 items

Displayed results
Dedicated flame sensor for distribution boards and control panels.

Dedicated flame sensor for distribution boards and control panels.

By instantly detecting the barely visible "spark," we can prevent fires before they occur.

Factory fires are often caused by ignition or sparks from electrical systems (electrical fires), and the locations of these incidents are said to be within distribution boards and control panels. To achieve early detection of fires within distribution boards and control panels, we developed SKH089. This device consolidates ultraviolet detection technology into a compact body, allowing for high-sensitivity detection of flames and sparks that occur inside the panel. Additionally, it can detect the diffuse reflection of ultraviolet light generated within the panel, enabling flexible installation layouts. 【Features】 ■ High-sensitivity detection of flames and sparks (ultraviolet) originating from distribution boards ■ Detection of diffuse reflection of ultraviolet light ■ Compact body & direct installation on DIN rails ■ Equipped with relay c contact output

  • Safety Sensors
  • Sensors
  • Board materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heavy machinery flame sensor

Heavy machinery flame sensor

Prevent engine fires caused by dust at waste disposal sites! Introducing our heavy machinery flame sensor.

The heavy machinery flame sensor SKH086M was developed for the early detection of fires originating from the engine room of heavy machinery. It detects ultraviolet rays emitted from flames that occur in the engine room of heavy machinery and alerts the operator with an alarm. To withstand the operating environment of heavy machinery, it is equipped with heat resistance, vibration resistance, dustproof, and completely waterproof features. It supports wireless output (920MHz), reducing installation hassle. *Note: A separate dedicated wireless receiver SKH086RDM is required when using the wireless function. 【Features】 ■ Can be directly installed in the engine room of heavy machinery ■ Usable in harsh environments such as dust and high temperatures ■ Prevents accidents caused by fires through early flame detection ■ Detects ultraviolet rays emitted from flames and alerts the operator with an alarm *For more details, please refer to the PDF document or feel free to contact us.

  • Safety Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Standard Flame Sensor

Standard Flame Sensor

Extremely high detection performance! Our proprietary solar separation technology enables outdoor use.

The SKH047M is a flame sensor that can detect flames equivalent to that of a lighter from a distance of 10 meters using ultraviolet detection technology. It instantly detects the ultraviolet rays emitted by flames from lighters or matches ignited by arsonists. Our flame sensor can be used outdoors thanks to our unique sunlight separation technology. It supports relay output, allowing you to drive alarm buzzers, rotating lights, voice synthesis units, and more. 【Features】 ■ Compliant with dustproof and waterproof standards (IP64) ■ High sensitivity for flame detection ■ Easy-to-change detection timer settings using DIP switches *For more details, please refer to the PDF document or feel free to contact us.

  • Safety Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010(W)

Flame Sensor FS-5010(W)

Instantly catch flames 30 meters ahead! A revolutionary UV detection flame sensor that can be installed outdoors.

■Two types of power supply available in the series We offer two types of power supply: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Cancel false triggers with 8 levels of sensitivity adjustment To account for all possible sources of false triggers, we have established sensitivity settings with 2 levels (High and Low) and detection timer settings with 4 levels (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of 8 detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body matches various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false triggers) and makes it easy to confirm during sensitivity settings or when experiencing unstable operation.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tokai Communication System Flame Sensor

Tokai Communication System Flame Sensor

•Instantly detect flames!!

The flame sensor "FS-2000" detects the ultraviolet light contained in flames, so it activates the moment a small flame appears and outputs an alarm before it turns into a fire.

  • Other security

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010A(B)

Flame Sensor FS-5010A(B)

Instantly catch flames 30 meters ahead! A revolutionary UV detection flame sensor that can be installed outdoors.

■Two types of power supply available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Eight levels of sensitivity adjustment to cancel false triggers To account for all possible sources of false triggering, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of eight detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body matches various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false triggering) and makes it easy to confirm during sensitivity settings or when experiencing unstable operation.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010A(W)

Flame Sensor FS-5010A(W)

Instantly catch flames 30 meters ahead! A revolutionary ultraviolet detection flame sensor that can be installed outdoors.

■Two types of power supply available in the series We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Eight levels of sensitivity adjustment to cancel false triggers To account for all possible sources of false triggering, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of eight detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body fits various installation locations. Thanks to the unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by an indicator light. This allows you to check surrounding ultraviolet sources (causes of false triggering), making it easy to confirm during sensitivity settings or when experiencing unstable operation.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010(B)

Flame Sensor FS-5010(B)

Instantly catch flames 30 meters ahead! A revolutionary ultraviolet detection flame sensor that can be installed outdoors.

■Two types of power supply available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model based on your application and installation location. ■Eight levels of sensitivity adjustment to cancel false triggers To account for all possible sources of false triggers, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. With a total of eight detection conditions, you can set it according to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body matches various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false triggers) and makes it easy to confirm during sensitivity settings or when the operation is unstable.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor (Multilingual Message Type) FS-7000

Flame Sensor (Multilingual Message Type) FS-7000

This is a flame sensor with built-in messages in five languages. It is battery-operated and has a rainproof structure, making it possible to prevent arson even in outdoor locations without a power source!

■Can be installed outdoors and is battery-operated. ● It can be installed outdoors with a rainproof structure (equivalent to IP33), providing clearer sound quality for messages and alarm sounds compared to integrated speakers. ● Since it is battery-operated, it can be used in various locations, including places without power. ■Equipped with messages for non-smoking and fire prohibition in five languages. ● It includes messages in five languages: Japanese, English, Chinese, Korean, and Spanish. ● Messages can be selected from "Non-smoking notification" and "Fire prohibition notification," and alarm sounds can also be set. ● It uses a large speaker that delivers clear sound quality for messages and alarm sounds even outdoors. ● The volume can be adjusted for messages from "0 to 95 dB" and for alarm sounds from "0 to 90 dB." ● Messages can be customized with special messages (optional). ■Options to select necessary languages and the number of message activations. ● You can choose to activate only the language of the necessary country from Japanese, English, Chinese, Korean, and Spanish. ● The number of message activations can be selected as either 1 time or 2 times.

  • Other security and surveillance systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[FM Certified] Standard Flame Sensor

[FM Certified] Standard Flame Sensor

It has been certified as the world's first flame sensor with a UV detection method and a non-explosion-proof structure!

What is FM Certification? FM Certification is a proprietary standard operated by an insurance company based in the United States, which tests and evaluates the safety and performance of products from all aspects, including hardware and software. Sensors that pass specific criteria are awarded the "FM Approved" certification mark, proving the high reliability of the product. Our company has cleared this rigorous testing and has been approved as the world's first non-explosion-proof ultraviolet detection flame sensor. (As of October 2024) Obtaining this certification among flame sensors, which are considered to have few product standards, further ensures the quality and safety of our products.

  • Safety Sensors
  • Other safety equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame sensor for belt conveyor

Flame sensor for belt conveyor

Directly installed in the conveyor! Can be used for fire prevention measures in waste disposal facilities.

In recent years, there have been damages caused by fires at waste treatment facilities, which have become a social issue. Many of these incidents are due to the ignition and explosion caused by mobile batteries and lithium-ion batteries mixed in with combustible waste. Our flame sensor for belt conveyors can detect flames and sparks with high sensitivity and at an early stage, helping to minimize damage from fires. The SKH086EEP is designed to be directly installed on belt conveyors and crushers, featuring 【heat resistance】【vibration resistance】【dustproof】【completely waterproof functions】. 【Features】 ■ Can be directly installed on belt conveyors and crushers ■ Usable in harsh environments such as dust and high temperatures ■ Early detection of flames to prevent accidents caused by fires ■ Convenient open collector output that can be linked with alarm devices *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Safety Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame sensor with automatic extinguishing function for distribution boards and control panels.

Flame sensor with automatic extinguishing function for distribution boards and control panels.

This single unit addresses electrical fires in distribution boards and control panels with "early detection" and even "automatic extinguishing"!

The occurrence of electrical fires is said to be concentrated in distribution boards and control panels. Since distribution boards and control panels are responsible for the power and control of buildings and equipment, damage from a fire can require significant time and cost for recovery. Our flame sensor instantly detects flames (ultraviolet light) generated by a fire, and with the use of CO2 extinguishing agents, it enables not only rapid initial extinguishing but also allows for quick recovery without any risk of contamination. Safety measures for distribution boards and control panels are often overlooked, so please consider this opportunity. 【Features】 ■ Early detection of flames generated inside the panel through ultraviolet detection ■ Rapid extinguishing possible with CO2 extinguishing agents ■ No risk of contamination from extinguishing agents ■ Can be retrofitted onto DIN rails ■ Selection of the number of connected cylinders according to the panel's capacity

  • Sensors
  • Safety Sensors
  • Board materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.